HSDJETS Super Viper Turbine Blue With Smoke & Swiwin 60 – Ready To Fly


In Stock Now

SKU: A15 05 02 00X-2 Categories: ,

HSDJETS Super Viper Turbine Blue With Smoke & Swiwin 60 Turbine installed – Ready To Fly, Includes either Futaba or Spektrum RX and Overlander Flight Batteries, Will be programmed for Futaba or Spektrum and model file supplied. CG done, all control surfaces checked, Failsafe is set, Expo, Duel Rates and End Points Set.

Literally Bind and Fly. We advise you to double check everything, control movements, confirm Failsafe is set and a range check must be done. Please call us to discuss before purchasing.


1 x HSDJETSUK Super Viper Foam Turbine Blue, Gold Colour
1 x Swiwin SHW-60B V3 Brushless Turbine – fully installed, plumbed, setup and tested
3 x Overlander Batteries, 2 for RX and 1 for ECU – installed
1 x Futaba R7008SB Rx FASSTest (S-Bus & S-Bus2) (HV) 2.4GHz or 1 x Spektrum AR8020T 8-Channel Telemetry Receiver – installed
1 x Model file setup for either Futaba or Spektrum
1 x Custom build, includes:- turbine installation with all plumbing done, turbine tested and smoke tested. Radio programmed, control surfaces checked, servo reverses done, end points adjusted, expo and duel rates set, CG set. please allow 1-2 days for us to complete.





Weight27.5000 kg
Dimensions52.5600 × 21.3000 × 16.9300 cm
Add RX

Futaba R7008SB, Spektrum AR8020T



Wingspan1500mm (59.1in)
Length1663mm (65.5in)
Flying Weight6.5kg (14.3 lb)
Turbine EngineSW60B 6KG brushless (Included, Installed and Tested)
Cruising speed250 km/h
Flying time5 mins (full throttle)
Wing area34.28 dm2
Wing load189.6 g/dm2
Main material20 times EPO
Painting surfacematte paint
Suitable experience level□Zero basis □Beginner □Intermediate ■Advanced
RTF Assembly Time■10mins
Suitable for ambient temperature0℃~40℃
Radio SystemFutaba or Spektrum 8 channel TX (required & not included)
Control SystemMFC-2085
Servos25g×2 Metal gear with 480mm lead (left & right ailerons forward)
25g×3 Metal gear with 190mm lead (Flap×2 & rudder×1 forward)
25g×2 Metal gear with 80mm lead (elevator forward)
12g×1 Metal gear with 300mm lead (Nose wheel steering forward)
12g×1 Metal gear (360°lock Hatch cover forward)
Battery2 x 2S 7.4V with XT60 type plug and 1 x 3s 11.1v With XT60 (Included)
Elevator(Horizontal tail)Yes
Rudder(Vertical tail)Yes
The smoke systemYes
LED lights systemYes
Electromagnetic brake systemYes
Reinforced gyroSelective configuration (not included)
Packaging / SizePacking Box + Outer Box(Card mark)/132.5×46×39.5(cm)
CG (Centre of Gravity)170mm from the leading edge of the Main Wing
Landing GearsMetal electric retractable hydraulic landing gear×3
Battery ChargerLiPo battery charger (required & not included)


  • Fuselage×1
  • Left Wing×1
  • Right Wing×1
  • Left Horizontal Stabilizer×1
  • Right Horizontal Stabilizer×1
  • Vertical Stabilizer×1
  • Nose×1
  • Cockpit canopy×1
  • Main wing carbon tube L=598mm external diameter 16mm×1
  • Horizontal Stabilizer carbon tube L=500mm external diameter 6mm×1
  • Sticker×1
  • Capping board×1
  • Accessories Bag 1 ×1
    • Nylon rocker arm of the servo ×2
    • Double sided sponge paper×1
    • Screw (HM4×35mm)×4 (Nose)
    • Screw (HM3×14mm)×2 (Wing)
    • Screw (HM3×10mm)×2 (Wing)
    • Screw (PA3×14mm)×4 (Engine)
    • Screw (PA3×10mm)×4 (Tail nozzle)
    • Screw (PA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer)
  • Accessories Bag 2 ×1
    • L type 3mm inner six corner board hand×1
    • Screw (HM4×35mm)×4 (Nose)
    • Screw (HM3×14mm)×2 (Wing)
    • Screw (HM3×10mm)×2 (Wing)
    • Screw (PA3×14mm)×4 (Engine)
    • Screw (PA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer)
  • Manual×1
  • Swiwin SWH-60B V3 Fitted and Tested
  • Futaba or Spektrum RX (Included, customer choice)
  • Overlander Flight Batteries for RX and ECU Included
  • Setup and CG done


  • Futaba or Spektrum 8 channel TX (required & not included)
  • LiPo battery charger (required & not included, with XT60)




HSDJETS Super Viper Foam Turbine V3.pdf



You may also like…

Shopping Cart